1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Flash the VU+ Duo2 via USB

Discussion in 'Vu+' started by Herocccam, Oct 1, 2016.

  1. Herocccam

    Herocccam Administrator Staff Member Administrator

    Aug 24, 2016
    Likes Received:
    Trophy Points:
    +7 / 0 / -1
    It is very simple to flash your VU+ Duo2 receiver using an USB stick. Just follow these instructions:
    1. Format your USB stick with a FAT32 file system
    2. Create a folder "vuplus" in the root directory of the USB disk (note: this HAS to be lower case!)
    3. Create a folder "duo2" in the "vuplus" directory you've just created (again, this HAS to be lower case!)
    4. Download the USB image of your choice (this is an image specific for USB flashing, you can not use the standard .nfi file!)
    5. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool
    6. Copy the three files that are in the zip archive to the "duo2" directory on the USB stick
    7. Switch your VU+ Duo2 off (power-off, not stand-by!)
    8. Insert the prepared USB stick into the front of your VU+ Duo2 receiver
    9. Switch your VU+ Duo2 on
    10. Follow the installation instructions on the screen

Share This Page